Gigabyte Z690 Aorus Ultra Wifi Motherboard

Category:

Description

Additional information

CPU

1. LGA1700 socket: Support for 13th Generation Intel® Core™ Processors and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors 2. L3 cache varies with CPU Note;- a. Please refer to ""CPU Support List"" for more information.

CHIPSET

1. Intel® Z690 Express Chipset

MEMORY

1. Support for DDR5 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 MT/s memory modules 2. 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory 3. Dual channel memory architecture 4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) 5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules 6. Support for Extreme Memory Profile (XMP) memory modules Note:- a. The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to ""Memory Support List"" for more information.

GRAPHICS

1. Integrated Graphics Processor-Intel® HD Graphics support: a. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz Note:- a. Support for DisplayPort 1.2 version and HDCP 2.3 b. Graphics specifications may vary depending on CPU support.

AUDIO

1. Realtek® ALC4080 CODEC 2. Support for DTS:X® Ultra 3. High Definition Audio 4. 2-channel analog output 5. Support for S/PDIF Out 6. 7.1-channel digital signals Note:- a. Actual output of digital signals may vary depending on the playback content and software used, and an external DAC is required.

LAN

1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

WIRELESS COMMUNICATION MODULE

1. WIFI Module 2. WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band 3. BLUETOOTH 5.2 4. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate Note:- a. Actual data rate may vary depending on environment and equipment.

EXPANSION SLOTS

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) * Note:- a. For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. b. The PCIEX16 slot conforms to PCI Express 5.0 standard. c. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) (The PCIEX4 slots conform to PCI Express 3.0 standard.)

STORAGE

1. CPU: a. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) 2. Chipset: a. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 4.0 x4/x2 SSD support) (M2C_SB) b. 2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB) c. 6 x SATA 6Gb/s connectors d. Support for RAID 0, RAID 1, RAID 5, and RAID 10 Note:- a. Refer to ""2-8 Internal Connectors,"" for the installation notices for the M.2 and SATA connectors. Intel® Optane™ Memory Ready b. System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connectors supported by the Chipset.

USB

1. Chipset: a. 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header) b. 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel 2. Chipset+2 USB 3.2 Gen 1 Hubs: a. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) 3. Chipset+2 USB 2.0 Hubs: a. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)

INTERNAL I/O CONNECTORS

1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x 4-pin ATX 12V power connector 4. 1 x CPU fan header 5. 1 x water cooling CPU fan header 6. 4 x system fan headers 7. 2 x system fan/water cooling pump headers 8. 2 x addressable LED strip headers 9. 2 x RGB LED strip headers 10. 4 x M.2 Socket 3 connectors 11. 6 x SATA 6Gb/s connectors 12. 1 x front panel header 13. 1 x front panel audio header 14. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support 15. 1 x USB 3.2 Gen 1 header 16. 2 x USB 2.0/1.1 headers 17. 1 x noise detection header 18. 2 x Thunderbolt™ add-in card connectors 19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 20. 1 x power button 21. 1 x Q-Flash Plus button 22. 1 x reset button 23. 1 x reset jumper 24. 1 x Clear CMOS jumper 25. 2 x temperature sensor headers

BACK PANEL CONNECTORS

1. 2 x SMA antenna connectors (2T2R) 2. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support 3. 4 x USB 3.2 Gen 2 Type-A ports (red) 4. 4 x USB 3.2 Gen 1 ports 5. 4 x USB 2.0/1.1 ports 6. 1 x DisplayPort 7. 1 x RJ-45 port 8. 1 x optical S/PDIF Out connector 9. 2 x audio jacks

I/O CONTROLLER

1. iTE® I/O Controller Chip

H/W MONITORING

1. Voltage detection 2. Temperature detection 3. Fan speed detection 4. Water cooling flow rate detection 5. Fan fail warning 6. Fan speed control Note:- a. Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. Noise detection

BIOS

1. 1 x 256 Mbit flash 2. Use of licensed AMI UEFI BIOS 3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

UNIQUE FEATURES

1. Support for APP Center Note:- a. Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. b. @BIOS c. EasyTune d. RGB Fusion e. Smart Backup f. System Information Viewer g. Support for Q-Flash Plus h. Support for Q-Flash i. Support for Xpress Install

BUNDLED SOFTWARE

1. Norton® Internet Security (OEM version) 2. cFosSpeed

OPERATING SYSTEM

1. Support for Windows 11 64-bit 2. Support for Windows 10 64-bit

FORM FACTOR

1. ATX Form Factor; 30.5cm x 24.4cm

Reviews

There are no reviews yet.

Be the first to review “Gigabyte Z690 Aorus Ultra Wifi Motherboard”

Your email address will not be published. Required fields are marked *