PC Mart360

Awaiting product image

Gigabyte Z690 Aorus Pro DDR4 Wifi Motherboard

Compare
Category:

Description

Additional information

CPU

1. LGA1700 socket: Support for 13th Generation Intel® Core™ Processors and 12th Generation Intel® Core™, Pentium® Gold and Celeron® Processors 2. L3 cache varies with CPU Note:- a. Please refer to ""CPU Support List"" for more information.
CHIPSET

1. Intel® Z690 Express Chipset
MEMORY

1. DDR4 5600(O.C.)/ 5400(O.C.)/ 5333(O.C.)/ DDR4 5133(O.C.)/DDR4 5000(O.C.)/4933(O.C.)/4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules 2. 4 x DDR DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory 3. Dual channel memory architecture 4. Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) 5. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules 6. Support for Extreme Memory Profile (XMP) memory modules Note:- a. Please refer ""Memory Support List"" for more information.
GRAPHICS

1. Integrated Graphics Processor-Intel® HD Graphics support: a. 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz Note:- a. Support for DisplayPort 1.2 version and HDCP 2.3 b. Graphics specifications may vary depending on CPU support.
AUDIO

1. Realtek® ALC4080 CODEC 2. High Definition Audio 3. 2-channel analog output 4. Support for S/PDIF Out 5. 7.1-channel digital signals Note:- a. Actual output of digital signals may vary depending on the playback content and software used, and an external DAC is required.
LAN

1. Intel® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
WIRELESS COMMUNICATION MODULE

1. WIFI Module 2. WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band 3. BLUETOOTH 5.2 4. Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate Note:- a. Actual data rate may vary depending on environment and equipment.
EXPANSION SLOTS

1. 1 x PCI Express x16 slot, running at x16 (PCIEX16) Note:- a. The PCIEX16 slot conforms to PCI Express 5.0 standard. 2. 2 x PCI Express x16 slots, running at x4 (PCIEX4_1, PCIEX4_2) Note:- a. The PCIEX4 slots conform to PCI Express 3.0 standard.
STOARGE

1. CPU: a. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) 2. Chipset: a. 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 4.0 x4/x2 SSD support) (M2C_SB) b. 2 x M.2 connectors (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_SB/M2Q_SB) c. 6 x SATA 6Gb/s connectors d. Support for RAID 0, RAID 1, RAID 5, and RAID 10 Note:- a. Refer to ""2-8 Internal Connectors,"" for the installation notices for the M.2 and SATA connectors. 1. Intel® Optane™ Memory Ready Note:- a. System acceleration with Intel® Optane™ Memory can only be enabled on the M.2 connectors supported by the Chipset.
USB

1. Chipset: a. 2 x USB Type-C® ports, with USB 3.2 Gen 2×2 support (1 port on the back panel, 1 port available through the internal USB header) b. 4 x USB 3.2 Gen 2 Type-A ports (red) on the back panel 2. Chipset+2 USB 3.2 Gen 1 Hubs: a. 6 x USB 3.2 Gen 1 ports (4 ports on the back panel, 2 ports available through the internal USB header) 3. Chipset+2 USB 2.0 Hub: a. 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers)
INTERNAL I/O CONNECTORS

1. 1 x 24-pin ATX main power connector 2. 1 x 8-pin ATX 12V power connector 3. 1 x 4-pin ATX 12V power connector 4. 1 x CPU fan header 5. 1 x water cooling CPU fan header 6. 4 x system fan headers 7. 2 x system fan/water cooling pump headers 8. 2 x addressable LED strip headers 9. 2 x RGB LED strip headers 10. 4 x M.2 Socket 3 connectors 11. 6 x SATA 6Gb/s connectors 12. 1 x front panel header 13. 1 x front panel audio header 14. 1 x USB Type-C® header, with USB 3.2 Gen 2×2 support 15. 1 x USB 3.2 Gen 1 header 16. 2 x USB 2.0/1.1 headers 17. 1 x noise detection header 18. 2 x Thunderbolt™ add-in card connectors 19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 20. 1 x power button 21. 1 x reset button 22. 1 x Q-Flash Plus button 23. 2 x temperature sensor headers 24. 1 x reset jumper 25. 1 x Clear CMOS jumper Note:- a. All fan headers are subject to support AIO_Pump, Pump and high performance fan with the capability of delivering up to 2A/12V @ 24W.
BACK PANEL CONNECTORS

1. 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support 2. 4 x USB 3.2 Gen 2 Type-A ports (red) 3. 4 x USB 3.2 Gen 1 ports 4. 4 x USB 2.0/1.1 ports 5. 2 x SMA antenna connectors (2T2R) 6. 1 x DisplayPort 7. 1 x RJ-45 port 8. 1 x optical S/PDIF Out connector 9. 2 x audio jacks
I/O CONTROLLER

1. iTE® I/O Controller Chip
H/W MONITORING

1. Voltage detection 2. Temperature detection 3. Fan speed detection 4. Water cooling flow rate detection 5. Fan fail warning 6. Fan speed control Note:- a. Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install. Noise detection
BIOS

1. 1 x 256 Mbit flash 2. Use of licensed AMI UEFI BIOS 3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
UNIQUE FEATURES

1. Support for APP Center Note:- a. Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. b. @BIOS c. EasyTune d. RGB Fusion e. Smart Backup f. System Information Viewer g. Support for Q-Flash Plus h. Support for Q-Flash i. Support for Xpress Install
BUNDLED SOFTWARE

1. Norton® Internet Security (OEM version) 2. cFosSpeed
OPERATING SYSTEM

1. Support for Windows 11 64-bit 2. Support for Windows 10 64-bit
FORM FACTOR

1. ATX Form Factor; 30.5cm x 24.4cm

Reviews

There are no reviews yet.

Be the first to review “Gigabyte Z690 Aorus Pro DDR4 Wifi Motherboard”

Your email address will not be published. Required fields are marked *

Related products